Hot Form Helper (1st Shift)
( Learn More )
Hot Form Helper (1st Shift)
Job Summary & Essential Functions: The following describes in general terms the purpose and scope of the position. Tends machine equipped with compressed air spray nozzles that coat products or materials with a dry film lubricant that protects the material during the forming operation.
% of Time
• Hanging parts prior to spraying parts.
• Mixes boron nitride with thinner solution according to formula.
• Applies dry lube per work order and mil specifications.
• Pours premixed dry lube into reservoir of machine and couples hose to paint pots or cup guns.
• Adjusts sleeve on nozzles to attain specified spraying pressure and turns thumbscrew to adjust spray pattern towards articles or materials to be coated
• Assist in Sand blasting parts as needed
• Assist in Die Polish as needed
• Assists with dry lube room inventory and 6s Lean processes
• Ability to operate an overhead crane
• Ability to operate a forklift.
• Team oriented with a continuous improvement outlook.
• Responsible for the proper handling and management of hazardous waste generated in their work area.
• Performs other duties as assigned.
Work Environment and Safety Equipment Required: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job.
Responsible for the proper storage of hazardous wastes within the department and collection of hazardous wastes from other departments, including transportation to the hazardous waste storage shed.
Knowledge of policy and procedures in the event of a hazardous waste release, fire or explosion. Knowledge of the chemical characteristics and location of hazardous waste in the facility. Ability to shut down operations.
Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.
Annual pulmonary test is required.
Annual eye exam is required.
Safety Footwear shall be in accordance with the following: ASTM standard F2413-05 with minimum impact resistance, compression resistance and metatarsal designation ratings of 75 foot pounds (i.e. ASTM F2413-05 I/75 C/75 Mt/75), which are viewable on the inside tag of footwear
Management reserves the right to add, modify, change or rescind the work assignments in accordance with business needs, and to make reasonable accommodations so that qualified employees can perform the essential function of the job.
Skills & Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, qualifications, competencies, abilities and any physical demands if required. Physical demands are representative of those that must be met by an employee to successfully perform the essential requirements of this job.
Able to read blueprints and mylars
Must be able to communicate effectively.
Must be able to work in a spray booth environment.
Must be safety oriented.
Read and understand internal procedures and policies.
Understand and follow through on both verbal and written instructions.
Basic Computer Skills - able to learn new screens, reports, functions and simple software programs with assistance.
Physical Demands (reasonable accommodations may be made, if necessary):
Physical Abilities Lift /Carry
Stand - Continuously 10 lbs or less - Frequently
Walk - Frequently 11-20 lbs - Frequently
Sit -N/A 21-50 lbs - Frequently
Climb - N/A 51-100 lbs - N/A
Crawl - N/A Over 100 lbs - N/A
Squat or Kneel - Frequently
Bend - Frequently Push / Pull
Fine Manipulation - Frequently 10 lbs or less - Frequently
Reach Outward - Frequently 10-20 lbs - Frequently
Reach Above Shoulder - Frequently 20-50 lbs - N/A
Drive - Occasionally 50-100 lbs - N/A
Over 100 lbs - N/A
N/A (Not Applicable) - Activity is not applicable to this occupation
Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs/day)
Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs/day)
Continuously - Occupation requires this activity more than 66% of the time (5.5+ hrs/day)
Other Physical Requirements:
Required Experience/Education/Training/Certifications: To perform this job successfully, an individual must possess the outlined experience level, education, training, minimum years of experience, product or industry knowledge plus any certifications in order to be considered.
High School Diploma; up to 3 years related experience in job function and/or training; equivalent combination of education and experience
3333 Main Street
Parsons, Kansas, 67357
2018 True Careers Inc. All rights reserved |
Entry Level Jobs
Jobs in Canada
Jobs in UK
Free Career Test